KEY FEATURES
- Dispenses hot, cold and 100°C purified water from a single spout when connected to a hot & cold supply
- Flexible pull out hose
- Can be converted to a 4-in-1 model with the addition of the optional Cold Water Filter kit
- Childproof double-push-and-turn textured handle with light ring
- Highly energy efficient
- HiTAC water filter
- Stainless steel 3 litre tank
- Vacuum insulation
- Standby power consumption 10w
- Power 1600w
- Heat up time from cold 10 minutes
- 10 bar maximum pressure
- Pressure relief valve
- Ceramic water shut off valve
- High temperature activated carbon water filter with 5 year lifespan
- The Flex will not dispense boiling water when the pull out hose is pulled out In order to get boiling water, you must also first use the double-push-and-turn handle
Please note:
This model requires connection to your existing hot and cold water supply
Optional cold water filter and Scale control filter available at an extra cost
KEY SPECIFICATIONS
OVERVIEW | |
Voltage | 230 V |
Power | 1600 W |
capacity | 3 L |
Heating up time | 10 min |
Stand by power consumption | 10 W |
Tank height | 40 cm |
Tank height requirement | 48 cm |
Tank diameter | 15 cm |
TAP HOLE | |
boiling water tap | 32 mm |
mixer tap | 35 mm |
Fusion |
35 mm |
soap dispenser | 25 mm |
Min cold water pressure | 2 bar |
Min hot water pressure |
2 bar |
Water filter | High temperature activated carbon |